Apex Pristine Polish- 16 oz
APEX PRISTINE POLISH is our newly formulated, professional grade polish that will leave a brilliant, high gloss finish that is ready to receive protective paint coatings, sealants, or waxes. It improves paint clarity by removing imperfections such as oxidation, staining, hazing, and swirl marks. APEX PRISTINE POLISH contains abrasives that diminish during use. It removes more pronounced imperfections in the beginning and then breaks down into a final finishing polish. This single polish removes most types of minor paint imperfections!
● Easy application, removal, and clean up.
● Safe for use on clear coat, single stage, or lacquer paints.
● Achieves a reflective finish while removing up to 1,000 grit sanding scratches.
● Use polishing or finishing pads to achieve the best results.
● Haze free and low dust.
● Body shop safe.
● VOC compliant.
Directions:
Decontaminate the paint by using a clay bar.
Shake well before use.
Apply 4 drops of APEX PRISTINE POLISH to the polishing pad.
Set the polisher to a slower speed setting such as 3 – 4.
Apply polish evenly over a 2’ x 2’ area using a cross hatch pattern. Using light pressure move the polisher top to bottom first, then in a side-to-side motion. Overlap each pass of the polisher by 1/3.
While working the polish, the abrasives will slowly diminish. Progressively reduce the pressure on the polisher until a high gloss finish is achieved. Abrasives are depleted when a clear oily residue if left on the paint surface.
Remove the polish residue with a microfiber towel.
Apply 4 more drops of polish to the pad for each subsequent body panel.
Follow up with APEX GRAPHENE SPRAY COATING, APEX ARMOR SEALANT, APEX WET WAX, or APEX SPRAY AND SEAL to protect the newly polished paint finish.
APEX PRISTINE POLISH is our newly formulated, professional grade polish that will leave a brilliant, high gloss finish that is ready to receive protective paint coatings, sealants, or waxes. It improves paint clarity by removing imperfections such as oxidation, staining, hazing, and swirl marks. APEX PRISTINE POLISH contains abrasives that diminish during use. It removes more pronounced imperfections in the beginning and then breaks down into a final finishing polish. This single polish removes most types of minor paint imperfections!
● Easy application, removal, and clean up.
● Safe for use on clear coat, single stage, or lacquer paints.
● Achieves a reflective finish while removing up to 1,000 grit sanding scratches.
● Use polishing or finishing pads to achieve the best results.
● Haze free and low dust.
● Body shop safe.
● VOC compliant.
Directions:
Decontaminate the paint by using a clay bar.
Shake well before use.
Apply 4 drops of APEX PRISTINE POLISH to the polishing pad.
Set the polisher to a slower speed setting such as 3 – 4.
Apply polish evenly over a 2’ x 2’ area using a cross hatch pattern. Using light pressure move the polisher top to bottom first, then in a side-to-side motion. Overlap each pass of the polisher by 1/3.
While working the polish, the abrasives will slowly diminish. Progressively reduce the pressure on the polisher until a high gloss finish is achieved. Abrasives are depleted when a clear oily residue if left on the paint surface.
Remove the polish residue with a microfiber towel.
Apply 4 more drops of polish to the pad for each subsequent body panel.
Follow up with APEX GRAPHENE SPRAY COATING, APEX ARMOR SEALANT, APEX WET WAX, or APEX SPRAY AND SEAL to protect the newly polished paint finish.
APEX PRISTINE POLISH is our newly formulated, professional grade polish that will leave a brilliant, high gloss finish that is ready to receive protective paint coatings, sealants, or waxes. It improves paint clarity by removing imperfections such as oxidation, staining, hazing, and swirl marks. APEX PRISTINE POLISH contains abrasives that diminish during use. It removes more pronounced imperfections in the beginning and then breaks down into a final finishing polish. This single polish removes most types of minor paint imperfections!
● Easy application, removal, and clean up.
● Safe for use on clear coat, single stage, or lacquer paints.
● Achieves a reflective finish while removing up to 1,000 grit sanding scratches.
● Use polishing or finishing pads to achieve the best results.
● Haze free and low dust.
● Body shop safe.
● VOC compliant.
Directions:
Decontaminate the paint by using a clay bar.
Shake well before use.
Apply 4 drops of APEX PRISTINE POLISH to the polishing pad.
Set the polisher to a slower speed setting such as 3 – 4.
Apply polish evenly over a 2’ x 2’ area using a cross hatch pattern. Using light pressure move the polisher top to bottom first, then in a side-to-side motion. Overlap each pass of the polisher by 1/3.
While working the polish, the abrasives will slowly diminish. Progressively reduce the pressure on the polisher until a high gloss finish is achieved. Abrasives are depleted when a clear oily residue if left on the paint surface.
Remove the polish residue with a microfiber towel.
Apply 4 more drops of polish to the pad for each subsequent body panel.
Follow up with APEX GRAPHENE SPRAY COATING, APEX ARMOR SEALANT, APEX WET WAX, or APEX SPRAY AND SEAL to protect the newly polished paint finish.